Summary of JK-BMS: all settings and menus explained. How to program and set parameters.

00:00:00 - 00:40:00

This video covers the set up and programming of the JK-BMS, a battery management system for solar batteries. It explains the settings and menus of the device, and how to optimize the system for performance.

• 00:00:00 The JKBMS is a world-famous battery monitor and manager, and in this video, we'll be looking at the settings on the device. We'll explain what each setting does, and how to use them to optimize the JKBMS for your battery system.
• 00:05:00 This YouTube video explains the settings and menus of a JK-BMS. The battery's lifetime turn-on time, voltage, and amp hours are also explained.
• 00:10:00 The JK-BMS allows users to program and set parameters for their battery bank. The device has four buttons (lithium-ion phosphate, lithium-ion iron phosphate, and lto), and users can only change these settings once, at the beginning of installation. The JK-BMS also has a password protection feature, which allows users to switch off security features of the device.
• 00:15:00 The JK-BMS enables users to program and set parameters for their solar battery system. Advanced settings include cell overvoltage protection and an optional cell ovp setting.
• 00:20:00 The battery management system (BMS) allows you to safely shut down your battery bank if something goes wrong. The system has three settings: under voltage protection, cell over voltage protection, and power off voltage. The start balance voltage is also important and is set to 1 volt.
• 00:25:00 The JK-BMS is a solar charge controller designed to charge a battery to 13.8 volts. It has three charge levels (3.45, 3.65, and 4.2 volts), and a maximum charge current of 150 amps.
• 00:30:00 The JK-BMS allows for up to 150 amps of charging current, and has a number of safety features to protect your batteries and equipment. The BMS has a discharge over current protection delay and a short current protection recovery time.
• 00:35:00 The JK-BMS video explains the various settings and menus of the JK-BMS solar charge controller. The settings explained include: the battery bank temperature, the under protection temperature, the recovery temperature, the charge under temperature protection, and the private data. Most of these settings are already set, and the user only needs to set the con wire race settings.
• 00:40:00 The video explains how to set up and program the JK-BMS battery management system. It covers the various settings and parameters that need to be adjusted in order to get the best performance from the system. The author follows this up by describing how to test the system's performance and how to find any problems.