Summary of Titulador Volumétrico Karl Fischer HI 903 Determinación de humedad

00:00:00 - 00:20:00

This video demonstrates how to use the Karl Fischer HI 903 to determine the moisture level in a given area. The machine uses air pressure and solvent extraction to measure the humidity, and the user must calibrate the machine before use.

• 00:00:00 The Karl Fischer HI 903 determinates moisture using an automated system that includes a chamber, a measuring device, and an electrode. Next, screws are tightened to attach the measuring device to the instrument housing. Then, the air pump is attached to the instrument and the sample bottle is inserted into the measuring device. Finally, the instrument is calibrated.
• 00:05:00 In this video, Karl Fischer titulan determinator is used to measure humidity. First, the electrode connector is attached to the front of the equipment. Then the calibration hose is attached. We ensure that the hose is completely sealed and then we take a filter of sedimentator and install it in the measurement chamber. We then connect the bottle of titulan t and assemble the cap. We remove the connector and the acople together with the empaque. Then we take a filter of sedimentator and install it in the measurement chamber. We then connect the bottle of titulan t and assemble the cap. We remove the connector and the acople together with the empaque. Then we take a filter of sedimentator and install it in the measurement chamber. We then connect the bottle of titulan t and assemble the cap. We remove the connector and the acople together with the empaque. We then take a filter of sedimentator and install it in the measurement chamber. We then connect the bottle of titulan t and assemble the cap. We remove the connector and the acople together with the empaque. We then take a filter of sedimentator and install it in the measurement chamber. We then connect the bottle of tit
• 00:10:00 In this video, the titulador Volumétrico Karl Fischer HI 903 determinates the moisture level in a chamber. First, the solvent bottle is fitted with a cap. Next, the blue manometer is installed in the chamber. This manometer performs the function of transporting solvent from the bottle to the chamber where we remove the connection of the manometer to the chamber with the solvent, and adapt it to the blue manometer to proceed to fitting the cap. Next, we assemble the filter of the syringe, and adapt it. Next, we attach the cap. Finally, we proceed to the disposal stage where we attach the blue manometer to the top of the waste filter, and we adjust the connection. Next, we copy the other manometer in the air pump in the upper part of the fill button. We must be sure that every adaptation made with the specific packaging is made in order to avoid the maximum entry of humidity from the environment into our system. Finally, the disposal stage is finished. Next, we fit the bottle with the specific solvent for discard. In this stage, we take the cap for discard. The discard cap is composed of a syringe tube and a transparent manometer. We take the filter of the syringe
• 00:15:00 The video demonstrates how to set up and operate a titulador volumétrico Karl Fischer HI 903, which measures moisture levels in a given area. Once the installation of each part of the titulador system is complete, the titulador's on-off button is pressed to start the machine. The machine then scans each connected part, displaying the corresponding análoga card and air pump detection every time the machine is turned on. The machine then displays the last method of analysis and the five available options for titulación method. The general selection of titulación method is made by selecting the bureta method option. The machine then starts the air pump. Once the solvent is filled in the measurement cell, the titulador starts to work. First, the manual agitator is turned on with the button agitate. After that, the machine is stopped and the liquid level is measured. The solvent is then poured till the level reaches the bottom of the measurement cell. Next, the machine is turned off and the titulador's piston is replaced with the manual bureta. The titulador starts to work and the user has to measure the solvent level every minute. When the solvent level reaches
• 00:20:00 The titulador Volumétrico Karl Fischer HI 903 determines humidity by using air pressure and solvent extraction.