Summary of WLED for Beginners in 2022 (PLUG n' PLAY!)

00:00:00 - 00:10:00

This tutorial demonstrates how to connect and use a LED strip with a controller. The tutorial starts by explaining how to strip the connector wires of the light strip. Then, the wires are connected to the screw terminals of a controller. Lastly, the controller is plugged into an outlet and the light strip is plugged into the controller. Once the light strip is connected, the controller's firmware can be updated. Finally, the tutorial shows how to use the light strip with home assistant.

• 00:00:00 In this video, Aaron gives a simple guide on how to set up your own WLED project, using a pre-installed controller and some led light strips. He recommends a high-density led strip, and a power supply that can handle the current draw.
• 00:05:00 The author suggests starting off with a 8-amp power supply to avoid over-saturating your LEDs, and then configuring a controller (either an Atom high power addressable RGB LED controller or a digiuno) before connecting it to your wireless network. Once connected, you can test your color order and led count.
• 00:10:00 This video tutorial demonstrates how to connect and use a LED strip, which is a type of LED lighting. The tutorial starts by explaining how to strip the connector wires of the light strip. Then, the wires are connected to the screw terminals of a controller. Lastly, the controller is plugged into an outlet and the light strip is plugged into the controller. Once the light strip is connected, the controller's firmware can be updated. Finally, the tutorial shows how to use the light strip with home assistant.