Summary of Lian Li Lancool II Mesh Step-by-Step PC Build Guide

This is an AI generated summary. There may be inaccuracies.
Summarize another video · Purchase summarize.tech Premium

00:00:00 - 01:00:00

This video provides step-by-step instructions on how to build a PC using a Lian Li Lancool II Mesh case. The guide explains the advantages and disadvantages of having the case as an intake or exhaust, and recommends installing fans on the front or back of the radiator in order to achieve the best cooling performance.

00:00:00 This video shows how to assemble a PC using high-end components, including the new Lian Li Lancool II Mesh case. The PC is built around a msi x570 creation motherboard, Ryzen 9900X CPU, 64GB of Triton C Neo RAM, and a Rocket M.2 SSD. The video also shows how to install the graphics card and two accessory items, the hot swap bubble backplate for the hard drive cage and the cable extensions from Cable Mod.
00:05:00 The Lanco 2 Mesh is a well-designed, affordable case that is perfect for a simple, straightforward PC build. The case has a Mesh front panel that is easy to remove and replace, and three included RGB fans that can be controlled by the case's front panel. The case also comes with a bracket for installing a radiator or fan, and a screw for attaching the front panel.
00:10:00 The Lancool II Mesh Step-by-Step PC Build Guide shows how to remove and install the hard drive cage, motherboard, and power supply. It also shows how to install a radiator and fans in the front of the case.
00:15:00 The video provides step-by-step instructions for assembling a PC using a Lian Li Lancool II case. The first step is to install the CPU and RAM into the motherboard, and the last step is to install the motherboard into the case. The video also points out important information about the Lian Li Lancool II case, such as the white marking on the top left corner of the CPU socket and the gold triangle on the corner of the CPU that needs to be lined up with the marking on the motherboard.
00:20:00 This video explains how to install a CPU, m.2 SSDs, and chipset on a Lian Li PC. The process is very similar on different motherboards, and the motherboard comes with four screws to secure the components in place.
00:25:00 In this video, the author shows how to install a Lian Li Lancool II mesh PC build. First, they install a drive and RAM in the same way as with other PC builds. Next, they install the motherboard, and then line up the ram and socket. Finally, they install the motherboard into the case and screw it in place.
00:30:00 This video guide shows how to install a motherboard, case cables, CPU and case fan in a Lian Li Lancool II PC build. The author recommends investing in a magnetic screwdriver to make repairs easier, and advises plugging in as many cables as possible before adding more components.
00:35:00 The video walks viewers through the steps of installing a motherboard, graphics card, and storage in a new Lian Li PC. The user notes that there are two different types of cables to plug in and that it can be difficult to line up the pins on the cables with the holes on the motherboard header. Once the cables are plugged in, the user installs the power switch, reset switch, and HD audio cable.
00:40:00 This video shows how to build a PC using a Lian Li Lancool II chassis. The first step is to install the motherboard, processor, and RAM. Then, the video shows how to install the other components, including the graphics card, storage, and peripherals. Finally, the video shows how to connect the various cables.
00:45:00 In this video, the author shows how to build a PC using a Lian Li Lancool II case and motherboard. They discuss the various components and how to install them. They also show how to install a water cooling system.
00:50:00 This video provides a step-by-step guide on how to build a PC using a Lian Li Lancool II mesh case. The guide explains the advantages and disadvantages of having the case as an intake or exhaust, and recommends installing fans on the front or back of the radiator in order to achieve the best cooling performance.
00:55:00 The video demonstrates how to build a PC using a Lian Li Lancool II Mesh case. The author recommends installing the case's fans in a push configuration, in order to minimize the number of cables visible on the front of the PC. They also mention that in order to install the aio onto the bracket, they need to first remove the original fans.

01:00:00 - 02:00:00

The video provides a step-by-step guide on how to build a PC using a Lian Li Lancool II case. The guide recommends installing more intake fans than exhaust fans, in order to create positive pressure in the case and avoid dust accumulation. The guide also recommends installing the fans in a way that allows for variation in their placement.

01:00:00 In order to control RGB lighting on the included CPU killer fan kit, the user needs to plug in three cables - one for the RGB splitter, one for the original fans, and one for the CPU fan header. The RGB splitter allows the motherboard to control all three fans at once.
01:05:00 The video demonstrates how to connect the various parts of a Lian Li Lancool II Mesh PC build, including the motherboard, RGB fans, and pump head. The controller and pump head connectors can be plugged into either the motherboard's RGB header or a separate 3-pin connector included with the case, allowing for use with either addressable RGB or voltage-based speed control.
01:10:00 In this video, the builder shows how to install the radiator, pump head, and fan in the Lian Li Lancool II Mesh PC build. They also show how to apply thermal paste to the CPU.
01:15:00 This video explains how to build a PC using a Lian Li Lancool II case. The user adds a p-size amount of CPU thermal paste to the center of the cpu and then hovers the cpu block over the top of the cpu to get the clips over each of the clips in the end. They then tighten it up. They also remove the plastic cover and line up the clips on the bottom one on first, and then hook it over the top. They plug in the additional cables, and finally, plug in the fans, rgb connectors, and the cpu fan header.
01:20:00 In this video, a PC build guide for the Lian Li Lancool II is explained. The case is assembled and the five fans are plugged in. The RGB lighting node pro is plugged in to the motherboard, and then the fans are put into the case in the right orientation. Finally, the motherboard software is used to control the fans.
01:25:00 This video provides a step-by-step guide on how to build a PC using a Lian Li Lancool II case. The guide recommends installing more intake fans than exhaust fans, in order to create positive pressure in the case and avoid dust accumulation. The guide also recommends installing the fans in a way that allows for variation in their placement.
01:30:00 The video explains how to install the fans, addressable RGB strip, and SSDs in the Lancool II Mesh PC build. The fans can be installed in the opposite way around from the way they're shown in the instructions, and the cables can be plugged in after the fans are installed. The motherboard has a cursor header, so the lightning node pro can be plugged in directly.
01:35:00 The video discusses how to install a Lian Li Lancool II mesh PC build. The first task is to connect the various cables, including a SATA power cable and a data cable. Once the cables are connected, the drive assemblies can be installed onto the brackets. The video then shows how to install the power supply and the two drives.
01:40:00 In this video, the builder installs a power supply, cables, and graphics card in a Lian Li Lancool II PC case. They also install an m.2 expander card and a second PCI Express cable.
01:45:00 This guide walks viewers through installing a PC build with a Lian Li Lancool II Mesh motherboard, graphics card, and M.2 expansion card. The motherboard has three PCIe slots that can accommodate a graphics card, M.2 expansion card, or both, and the graphics card must be installed in the top slot. The guide also shows how to install the PC's power cables, graphics card, and M.2 expansion card.
01:50:00 This video guides viewers through the process of building a PC using a Lian Li Lancool II case. First, the PC is assembled and locked into place using thumb screws. Next, the graphics card is installed and the power supply cables are plugged in. Finally, the case is closed and the final steps of the build are completed.
01:55:00 In this video, the builder demonstrates how to build a PC using the Lian Li Lancool II Mesh Step-by-Step PC Build Guide. The build begins with tidy up of cables, followed by installation of the back plates and panels. Next, the builder installs the motherboard, graphics card, and other components. Finally, the builder installs Windows 10 and completes the build by connecting cables and powering on the PC. If all goes well, the PC will boot successfully and the builder will be able to install the operating system and begin using the computer.

02:00:00 - 02:30:00

This video provides a step-by-step guide for building a Lian Li Lancool II mesh PC. The first step is to connect the motherboard, front controller, and graphics card. The second step is to configure the motherboard and graphics card. The third step is to install the RAM and the M.2 expansion card. The fourth step is to turn on the PC and configure the lighting. The fifth step is to turn off the PC and configure the bias. The sixth step is to turn on the PC and configure the color cycle. The seventh step is to turn off the PC and configure the static white lighting. The eighth step is to turn off the PC and configure the color cycle and white lighting. The ninth step is to turn off the PC and configure the white lighting and graphics card. The tenth step is to turn off the PC and configure the graphics card and bias. The eleventh step is to turn off the PC and configure the bias and graphics card. The twelfth step is to turn off the PC and configure the graphics card and bias and system. Finally, the thirteenth step is to turn off the PC and save the configuration.

02:00:00 The video demonstrates how to build a PC using a Lian Li PC-K62 Mesh chassis, including how to install Windows and drivers. Once Windows is up and running, the user updates it and installs additional storage. The video concludes with instructions on how to show all storage devices on the PC.
02:05:00 This video provides a step-by-step guide on how to build a PC using Lian Li's Lancool II mesh chassis. First, the user selects the necessary documents and drives to be used in the build. Next, the user installs the operating system and necessary drivers. Finally, the user installs any necessary programs.
02:10:00 In this video, the author walks through the steps needed to build a PC using the Lian Li Lancool II chassis. First, they accept the terms and conditions of the build guide. Next, they install the required software and drivers. They then proceed to install the graphics card and audio drivers. Finally, they restart the computer and install the last drivers.
02:15:00 This guide shows how to install the required software and drivers for a PC build, as well as how to control the RGB lighting on the motherboard. The guide covers how to change the RAM, motherboard LED, and front panel RGB.
02:20:00 This video provides a step-by-step guide for building a Lian Li Lancool II mesh PC. The first step is to connect the motherboard, front controller, and graphics card. The second step is to configure the motherboard and graphics card. The third step is to install the RAM and the M.2 expansion card. The fourth step is to turn on the PC and configure the lighting. The fifth step is to turn off the PC and configure the bias. The sixth step is to turn on the PC and configure the color cycle. The seventh step is to turn off the PC and configure the static white lighting. The eighth step is to turn off the PC and configure the color cycle and white lighting. The ninth step is to turn off the PC and configure the white lighting and graphics card. The tenth step is to turn off the PC and configure the graphics card and bias. The eleventh step is to turn off the PC and configure the bias and graphics card. The twelfth step is to turn off the PC and configure the graphics card and bias and system. Finally, the thirteenth step is to turn off the PC and save the configuration.
02:25:00 This video demonstrates how to build a computer based on the Lian Li Lancool II chassis, including configuring the memory, motherboard, graphics card, and fans. The user sets the fan headers to pwm mode and enables smart fan mode on the graphics card and system fans, and then changes the fan headers to DC mode.
02:30:00 This YouTube video provides a step-by-step guide to building a PC using the Lian Li Lancool II chassis. The video includes instructions on setting up the system fans and RAM, as well as disabling certain features to save resources. After completing the build, the video concludes with a demonstration of the completed PC running.